Single (Angle) Lock Standing Seam

- For steep slope roof pitches > 6:12
- Panel widths from 12" - 24"
- Striking segmentation effect with seam width of 1/2"
- Tapering, concave and convex designs possible
- Fitting for both for modern and traditional architecture
RHEINZINK Single (Angle) Lock Standing Seam
The single (angle) lock standing seam is in the norm for roofs with a min. pitch of 6:12 in regions of heavy snowfall. Closing the seams of pre-fabricated panels is simple, compared with the double standing seam.
The single lock standing seam is a popular choice in visible areas of metal roofing where the roof pitch is greater, e.g. parapets, fascias and mansard roofs, whether running in the traditional vertical direction, diagonally or horizontally. The single lock is an eye-catching system even over large expanses of roofing.
This system may be fabricated into the following PRODUCT LINES: CLASSIC, artCOLOR and prePATINA
For more examples of Standing Seam projects from around the world, be sure to visit the RHEINZINK Project Gallery!
To request Standing Seam AutoCAD details, please e-mail: info(at)rheinzink.com
For additional information on the Standing Seam system, please contact your local RHEINZINK representative.