 |
|
|
|
Although we do not sell these tools ourselves, here is a list of recommendations. These tools are available from specialized dealers.
|
 |
|
MASC Sheet Metal Nibbler BK1
- For notching the profile before inserting the pinched seam into the connecting seam.
- In order to avoid cracking the sheet metal
- No need to use manual punching machines or drills and no additional notching is required
- Depth of notch can be regulated simply by regrooving
|
|
|
|
 |
|
Peening Hammer
375 PICARD g
- For cutting (driving) round sheet metal edges
|
|
|
|
 |
|
Plastic Wedge Hammer
Model 2785 01
- For shaping cross-seams on roof penetrations
- To produce turned-over longitudinal seams
|
|
|
|
 |
|
One-Handed Hole Punch - 1/8"
- Decreases splits in areas in which two notches clash
- Punch for galvanized sheet steel
|
|
|
|
 |
|
STUBAI Pinched Seam Pliers
Model 28 28 01
- Produce pinched seam wall connections
- Install sheets of zinc up to 3" high
|
|
|
|
 |
|
STUBAI Seam Opening Pliers
Model 27 95 01
- To open cross and longitudinal seams
|
|
|
|
 |
|
STUBAI Seam Pliers
Model 28 21 24
- To fold sheet metal edges to a depth of 1-3/4".
|
|
|
|
 |
|
STUBAI Deck Pliers
Model 2823 01
- To install ridged, hipped and cross seams on bends
- 6" of check width
- 22" length
- Insertion depth up to 7"
|
|
|
|
 |
|
MASC sheath vise-grip wrench
- To clamp two or more sheets of metal in roof penetrations
|
|
|
|
 |
|
STUBAI Circle Snips
Model 2677 01, right
- For cutting round edges to eaves, holes for connecting pieces and rounded roof penetrations
|
|
|
|
 |
|
STUBAI Circle Snips
Model 2677 02, left
- For cutting round edges to eaves, holes for connecting pieces and rounded roof penetrations
|
|
|
|
 |
|
Nylon hammer
Head Ø 13/16, 13 oz.
- Scratch resistant work on RHIENZINK "preweathered" - materials
|
|
|
|
 |
|
STUBAI Combination Tin Snips
Model 2700 01, right
- To cut longitudinal sections and larger radii
|
|
|
|
 |
|
STUBAI Combination Tin Snips
Model 2705 01, left
- To cut longitudinal sections and larger radii
|
|
|
|
 |
|
Exact Bevels
- To level roof pitches and angles
|
|
|
|
 |
|
Roofing Seamer
Model 2780 01
- To craft longitudinal and cross-seams
- As a counter hold against hammer blows
|
|
|
|
 |
|
STUBAI Pelikan Tin Snip
Model 318 shears
- To cut straight, longer sheet metal
|
|
|
|
 |
|
Pinched seam iron
- To create bigger pinched seams
|
|
|
|
 |
|
Awl 4"
- To open seams
- To center/mark the sheet metal
|
|
|
|
 |
|
RAU Drip Edge Bender
TK 105
- To cant edges of eaves terminations on panels
|
|
|
|
 |
|
RAU Drip Edge Closer
EDP 106
- To close eaves terminations on panels
|
|
|
|
 |
|
RAU Single Lock Closer
EDP 111
- Used to close angled seams manually
|
|
|
|
 |
|
RAU Double Lock Closer
EDP 117
- Used to close double seams manually
|
|
|
|
 |
|
RAU Sheet Metal Bending Tool
EDP 103
- Used to set up bends/folds of various heights
- To be used in ridged and arched areas
|
|
|
|
 |
|
MASC metal worker's set square
- Special flat galvanized steel set-square
- Allows all types of sheet metal to be layed out precisely on workbench and workshop floor
- No slipping, as a result of precise application on sheet steel
- 45°-superficial crack is possible
|
|
|
|
 |
|
MASC Anit-slip mat
- It sticks to almost all material in almost every position up to a 60° incline
- It reduces slippage of tools while working on slopes
|
|
|
|
|
|
|
